EMKO Proccess Digital Controller Counter ESM-XX30 Series

SPECIFICATIONS: PROCESS INPUT Universal Input: TC, RTD, DC Voltage/ Current Thermocouple ( TC) : L, J, K, R, S, T, B, E, N, C Thermoresistance ( RTD) : PT-100 DC Inputs: mV, V, mA Measuring Range: Please refer to Table-1 for input types and range selection . Accuracy : For thermocouple, thermoresistance, voltage ± 0.25% FS and for current ± 0.70% FS . Cold Junction Compensation: Automatically. ± 0.1° C/ 1° C Line Compensation: Maximum 10 Ohm Sensor Break Protection: Upscale. Sampling Cycle: 3 samples per second Input Filter: Selectable 0.0 to 900.0 seconds. CONTROL Control form: Selectable ON/ OFF, P, PI, PD or PID. OUTPUT Relay Output: Two pieces 5A@ 250Vac ( Selectable Process Control or Alarm output) SSR Drive Output: 18VDC/ 40mA DISPLAY Process Display : ESM-4430 : 10 mm Red 4 digits LED display ESM-7730 : 14 mm Red 4 digits LED display ESM-9930 : 14 mm Red 4 digits LED display ESM-9430 : 10 mm Red 4 digits LED display Set Value Display : ESM-4430 : 8 mm Green 4 digits LED display ESM-7730 : 8 mm Green 4 digits LED display ESM-9930 : 8 mm Green 4 digits LED display ESM-9430 : 8 mm Green 4 digits LED display LED indicators : AT( Autotune) , M( Manual mode) , A( Automatic mode) , PSET1/ ASET1/ ASET2 ( Control or alarm indicators) LEDs, PO, AO1, AO2 ( Control or alarm status indicator) , ° C/ ° F/ V LEDs. SUPPLY Supply Voltage: 100 to 240 Vac Universal Supply Voltage 24Vac/ Vdc Supply Voltage ( Optional) % 15/ + % 10 AC/ DC ( Power supply must be described in order) Power Consumption: Max. 6VA( AC) , 6W( DC)